do not scale from this print .250 6.35 ref .085 2.16 .025 sq 0.64 ref "a" "a" ipt1-50-d c1 fig.1 (ipt1-150-01-xx-d-xxx shown) (see note 11) .200 5.08 ref ((no of pos x .1000 [2.540]) + .0200[.508]) .010[.25] .060 1.52 .100 ref 2.54 01 02 c l see note 8 ipt1-1xx-xx-xx-d-xxx no of pos per row -02 thru -50 row specification (see note 11) -d: double (use ipt1-xx-d-xx-x) plating specification -s: selective, 30 au / 50 ni min on contact, matte tin tail -sm: selective, 30 au / 50 ni min on contact, matte tin tail -l: light selective, 10 au / 50 ni min on contact, matte tin tail lead style see table 1, sheet 2 option (see note 11) -pol: position #1 removed (use ipt1-xx-d-p) -fl: friction lock [pos -05 thru -25] (use ipt1-xx-d-fl-x & t-1s64-xx-x) .155 3.94 ref .020 0.51 ref .100 2.54 (typ) 2 max sway section "a"-"a" see table 1 19 20 01 02 (ipt1-110-01-x-d-pol shown) -pol: polarized option ipt1-xx-d-p -fl: friction lock option (ipt1-110-01-x-d-fl shown) t-1s64-06-x c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] material: .100 double row shrouded terminal assembly by: ipt1-1xx-xx-xx-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 11-05-2002 2 1 sheet scale: 1:0.4 insulator: lcp, ul 94 vo, color: black contact: phos bronze, 510, 3/4 hard f:\dwg\misc\mktg\ipt1-1xx-xx-xx-d-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. maximum allowable cut flash: .010[.25]. 3. minimum terminal push out force: 2 lbs. 4. maximum variation between pin rows: .005[.13]. 5. "end walls" after cutting should be .015+/-.003[.38+/-.08]. 6. parts to be bulk packaged. 7. all dimensions to be about centerline within +/-.005[.13]. 8. presence of voids is optional and pattern to which they occur is variable. 9. -t plating option available for existing customers only. 10. note deleted. 11. standard bodies can be cut to position. for -pol & -fl options, bodies must be molded to position. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision s
"b" "c" "b" "b" ipt1-xx-d-xx-x htsw-50-d-lcp see table1 fig.2 (ipt1-110-02-xx-d-xxx shown) c2 .155 3.94 ref section "b"-"b" sheet of .100 double row shrouded terminal assembly by: ipt1-1xx-xx-xx-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 11-05-2002 2 2 sheet scale: 2:1 revision s f:\dwg\misc\mktg\ipt1-1xx-xx-xx-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
